The Ultimate Guide on How to Thread a Singer Sewing Machine

Learning how to thread a Singer sewing machine can be both exciting and daunting. Threading your Singer correctly is the first step in creating beautiful, handmade items such as quilts, garments, or home décor. Here we provide you with a step-by-step guide on how to properly thread a Singer sewing machine so that you can start stitching your projects right away!

Introduction to Threading a Singer Sewing Machine

A Singer sewing machine has two main parts: the upper thread (also known as the needle thread) and the lower thread (also referred to as the bobbin thread). In order to sew a stitch, these two threads must be crossed together, looped through the eye of the needle, and knotted securely at the end. To ensure that this process goes smoothly every time, it’s important to learn how to properly thread your Singer sewing machine.

Step 1: Wind the Bobbin

The bobbin is a small plastic spool that holds the lower thread for your Singer sewing machine. Before you can begin threading, you need to wind the bobbin with thread from your spool. To do this, insert the bobbin into the winding shaft located at the top of the machine and press down on the foot control. Make sure not to overfill the bobbin; stop when there is still room to fit your finger between the thread and the edge of the bobbin. Once you’ve wound your bobbin, take it out of the winding shaft and cut off any excess thread.

Step 2: Insert the Bobbin into the Bobbin Case

To insert the bobbin into the bobbin case, hold the bobbin by its edges with one hand while holding the metal case with your other hand. Place the bobbin onto the center pin and turn it counterclockwise until it locks in place. Make sure that the thread flows in an anti-clockwise direction around the bobbin case.

Step 3: Prepare the Spool of Thread

Now that you have inserted your bobbin into the bobbin case, it’s time to prepare your spool of thread for use. Start by cutting off a length of thread about 18 inches long and placing it behind the spool holder. Next, pull the thread up towards the top of the machine and slip it through the tension discs. Finally, pass the thread down through the takeup lever and out of the slot at the front of the machine.

Step 4: Raise the Presser Foot Lever and Draw Up the Bobbin Thread

Raise your presser foot lever to open up space beneath it. Then grasp the ends of both threads with one hand and gently pull them back and forth several times until you see a small loop appear below your presser foot. Pull on this loop until you feel some resistance, then move onto step five.

Step 5: Draw Up the Upper Thread Through the Takeup Lever

Locate the takeup lever, which looks like a flat plate with a hole in its center located above your presser foot. Guide your upper thread through this hole before pulling it up until it meets with resistance. This will draw up both threads through the needle.

Step 6: Pull Both Threads Under the Presser Foot Plate

Once you’ve drawn up both threads through the needle, they should now be visible underneath your presser foot. Carefully lift up the presser foot lever and slide both threads under it, making sure that they are lying side by side and free of tangles. Then drop the lever back down into its original position.

Step 7: Place Your Fabric under the Presser Foot

Now it’s time to get ready to start sewing! First lay your fabric under the presser foot and line it up along either side of the seam allowance mark on your machine bed. If you don’t have a seam allowance marked on your bed, make sure to leave at least ½ inch of space between your fabric and the needle plate.

Step 8: Lower the Feed Dogs and Start Sewing

You’re almost done! The last thing you need to do is lower your feed dogs – these are teeth located underneath your presser foot that help push your fabric through as you sew. To lower them, look for a switch near your needle plate and flip it downwards until they are fully engaged. You are now ready to start sewing!

Conclusion

Congratulations – you now know how to successfully thread a Singer sewing machine! With just eight simple steps, you’ll be able to quickly set up your machine each time you want to work on a project. Now all that’s left to do is pick out a pattern and get started!